PD6770 Field-Mount Loop-Powered Process Meter
Instruction Manual
2
Disclaimer
The information contained in this document
is subject to change without notice. Precision
Digital Corporation makes no representations
or warranties with respect to the contents hereof;
and specifically disclaims any implied warranties
of merchantability or fitness for a particular
purpose.
•
Read complete instructions prior to installation
and operation of the meter.
•
Risk of electric shock or personal injury.
•
This product is not recommended for life support
applications or applications where malfunctioning
could result in personal injury or property loss.
Anyone using this product for such applications
does so at his/her own risk. Precision Digital
Corporation shall not be held liable for damages
resulting from such improper use.
•
Failure to follow installation guidelines could
result in death or serious injury. Make sure only
qualified personnel perform the installation.
WARNING
Cancer and Reproductive Harm -
Limited Warranty
Precision Digital Corporation warrants this
product against defects in material or
workmanship for the specified period under
“Specifications” from the date of shipment from
the factory. Precision Digital’s liability under this
limited warranty shall not exceed the purchase
value, repair, or replacement of the defective unit.
See Warranty Information and Terms &
Conditions on
details.
© 2021 Precision Digital Corporation.
All rights reserved.
Introduction
The Vantageview PD6770 is a rugged, loop-powered
meter with 1" display digits. The plastic NEMA 4X and
IP66 field mountable enclosure is designed for de-
manding applications in the harshest environmental
conditions. The meter derives all of its power from the
4-20 mA loop with a small 1 volt drop for easy installa-
tion in almost any system.
The meter is programmed using four easy to access
front-mounted potentiometers with no complex or diffi-
cult to read programming menus necessary for setup.
The numeric display will read from -1000 to 1999 over
a 2000 count user adjustable scaling span. The back-
light option lets you see the display under any lighting
condition and is powered from the 4-20 mA loop with
no additional power supply required.
The enclosure is provided with three threaded conduit
holes and integrated pipe or wall mounting slotted
flanges.
Ordering Information
Model
Description
PD6770-0L0
Field-Mount Loop-Powered Process
Meter
PD6770-0K0
Field-Mount Loop-Powered Process
Meter with Backlight
Accessories
Model
Description
3/4" NPT Plastic Conduit Plug
24 VDC Power Supply for DIN Rail
Steel 2" U-Bolt Kit. All Material: Zinc
Plated Steel; (1) U-Bolt for 2" Pipe with
(2 each) Washers, Lock Washers, and
Nuts.
Stainless Steel 2" U-Bolt Kit. All
Material: Stainless Steel; (1) U-Bolt for
2" Pipe with (2 each) Washers, Lock
Washers, and Nuts.
Custom Stainless Steel Tag (see
website for convenient ordering form)
