www.predig.com
11
PD6620 Series
Loop Leader
Loop-Powered Rate/Totalizers
Free, PC-based, MeterView XL software that connects to the meter
via a micro USB cable is available for programming and setup of the
meters. This software greatly simplifies the programming process
and also allows the user to save configuration files for later use. The
meter will also be powered by the USB connection so no additional
power is needed during programming.
▲
The main screen displays an image of the connected meter and
includes various information about this meter, such as model
number, readings, and status.
▲
The Input/Scale window is used to:
▲
The 4-20 mA Output window is used to program the isolated
4-20 mA output’s source, range, and under and over range values.
Function
tHiS MEtER
Set the input
4-20 mA
Enable/disable the totalizer
Totalizer enabled
Enable/disable the dual-scale feature
Dual scale disabled
Scale the input
Linear input, unit is gallons,
2 cal points, 4-20 mA = 0-100 GAL
●
Free PC-Based USB Programming Software
●
Easy Programming of Features Packed Product
●
USB Connection Provides Power During Programming
●
Save & Print Configuration Files without Meter Connected
●
Micro USB Cable Provided
FREE SIMPLE TO USE METERVIEw XL PROGRAMMING SOFTwARE
▲
The Relay Output window is used to assign a specific task to the
2 relays such as alarm, sample, timer, stopwatch, or off. A custom
message that will flash every 10 seconds can also be added.
