PD301 - PD306 Smart Temp Transmitters
Instruction Manual
25
Parameter Setup
The Parameter Setup window is used to set up the input type, range
for the 4-20 mA, temperature units, and other settings related to the
sensor and analog output. The Display Mode allows the selection of
PV, mA, or % for the display.
The 4.000 mA and 20.000 mA settings correspond to the display
values at which the 4-20 mA output is generated.
Use the Offset parameter to make minor adjustments to the 4 mA
value.
The ExSense T transmitters support 2, 3, and 4-wire RTDs. The
selection must match the actual RTD wiring.
