Precision CAM Cowcam, User Manual

Page: 32 / 48

27
USING YOUR SYSTEM: THE LCD CONTROLLER
The LCD controller is the same as the standard PTZ joystick controller except for the
built in display. Please see the previous section for more information on using your
controller.
When you first power up the LCD controller you see information on the display. To
remove this information from the screen hold the
“ shi ” key for 2 seconds.
LCD controller layout:
A B C D E F
A) Number pad; this is used for changing the camera you are controlling as well as
entering numbers to run different pre
- set functions.
B) LCD display; this screen will display your camera. It also displays the parameters
of the controller.
C) Function keys; this key pad contains the programming and pre - set keys.
D) DVR function keys; not used for cowcam system, ignore these.
E) Lens control keys; these keys allow you to manually adjust the focus, zoom, and
iris of the camera.
F) Joystick; this is the main control interface for your camera. You can control the
direction of your camera my moving it up and down, or left and right. You can
also twist the joystick to zoom in and out.