Smartbox Piece counting
Software P00.01.01
Precisa Gravimetrics AG
24
10.1.4 Variable reference
– with preset tare value
If you do not wish to operate with the predetermined fixed reference you may freely select any desired
reference.
Preparation
Place filled container on balance
<
T >
Enter tare value
<ENTER>
< REF >
The
start-value
of the weight will be determined
(Display:
DIFF.
REF ...)
Remove or add reference
quantity
Enter reference quantity
< ENTER >
The
end-value
of the weight will be determined
-> weight
difference
/ reference quantity = unit weight
Counting
The current contents of the container will be displayed
in pieces unit
10.2 Counting with unit weight as reference
If you know the unit weight of the parts, proceed as follows :
1.
Inform the balance of the unit weight
2.
You can now commence counting
Without tare:
Preparation
< REF.W >
Enter reference weight
< ENTER >
Counting
Place article on balance
With tare:
Preparation
Place container with parts on balance
<
T >
Enter tare weight
< ENTER >
< REF.W >
Enter reference weight
< ENTER >
Counting
Place article on balance
