Malfunctions
51
Symptom
Possible cause
Remedy
Firing not possible.
Working pressure too
low.
Increase working
pressure of compressed
air system to maximum
admissible working
pressure.
Increase working
pressure at tool to
maximum admissible
working pressure.
Then fire several times.
If the tool fires, set the
desired working pressure
(see page 33).
Replace compressed air
cartridge
(see page 19).
The moving parts are
stuck with lubricant
after prolonged
storage.
Clean the tool and apply
fresh oil
(see page 46).
Set the maximum
working pressure.
Then fire several times.
If the tool fires, set the
desired working pressure
(see page 33).
Otherwise contact
Service
(see page 58).
Empty firing protection
device activated.
Fill magazine (from
page 26).