background image

English 

18 

 

In the event parts are being returned to your nearest sales office, autonomous company or authorized 
distributor, for inspection or repair, it is important to include the serial number of the unit from which the parts 
were removed. 
 

TERMS AND CONDITIONS ON PARTS ORDERS 
Acceptance:

  Acceptance of an offer is expressly limited to the exact terms contained herein.  If purchaser

order form is used for acceptance of an offer, it is expressly understood and agreed that the terms and 
conditions of such order form shall not apply unless expressly agreed to by Pramac Industries (

Company

) in 

writing.  No additional or contrary terms will be binding upon the Company unless expressly agreed to in writing. 
 

Taxes:

  Any tax or other governmental charge now or hereafter levied upon the production, sale, use or 

shipment of material and equipment ordered or sold is not included in the Company

s price and will be charged 

to and paid for by the Purchaser. 
Shipping dates shall be extended for delays due to acts of God, acts of Purchaser, acts of Government, fires, 
floods, strikes, riot, war, embargo, transportation shortages, delay or default on the part of the Company

vendors, or any other cause beyond the Company

s reasonable control.  

Should Purchaser request special shipping instruction, such as exclusive use of shipping facilities, including air 
freight when common carrier has been quoted and before change order to purchase order can be received by 
the Company, the additional charges will be honored by the Purchaser. 
 

Warranty:

  The Company warrants that parts manufactured by it will be as specified and will be free from 

defects in materials and workmanship.   
The Company

s liability under this warranty shall be limited to the repair or replacement of any part which was 

defective at the time of shipment provided Purchaser notifies the Company of any such defect promptly upon 
discovery, but in no event later than three (3) months from the date of shipment of such part by the Company.  
The only exception to the previous statement is the extended warranty as it applies to the special airend 
exchange program. 
Repairs and replacements shall be made by the Company F.O.B. point of shipment. The Company shall not be 
responsible for costs of transportation, removal or installation. 
Warranties applicable to material and equipment supplied by the Company but wholly manufactured by others 
shall be limited to the warranties extended to the Company by the manufacturer which are able to be conveyed 
to the Purchaser. 

 
Delivery

:  Shipping dates are approximate.  The Company will use best efforts to ship by the dates specified; 

however, the Company shall not be liable for any delay or failure in the estimated delivery or shipment of 
material and equipment or for any damages suffered by reason thereof.  
This company makes no other warranty or representation of any kind whatsoever, expressed or implied, except 
that of title, and all implied warranties, including any warranty of merchantability and fitness for a particular 
purpose, are hereby disclaimed. 

Summary of Contents for S10000



































































Reviews: