PR Lighting PR-2345A, User Manual

Page: 4 / 22

4
●
Any electrical connection must be carried out by a qualified person .
●
Before installation, please confirm the voltage supplied matches what is required for the projector
●
Each projector must be properly earthed and installed as per related electrical standards.
●
Do not use power cord with its insulator damaged and connect the power cord with other cables.
●
If the projector is not used or under cleaning,, please hold the plug and unplug it. Do not unplug it forcefully or
by pulling the power cable.
●
All power cords must conform to related safety and regulations
●
While being operated, the projector should not be under rains or in humidity.
●
Do not switch on and off the projector constantly in very short intervals, otherwise the light source’s and other
electrical parts’ life will be shortened .
●
There are safety cord holes at the bottom of the base of a projector. In view of safety, please run the safety cord
supplied through the safety cord holes for safety support.
●
Before any installation, maintenance and cleaning work, please ensure the projector is disconnected from power
mains.
●
.After stable operation under normal situation , its temperature is
80
℃
.
●
While the lamp is stricken for the first time, there will be smoke and strange smell. It’s normal and does not
mean the projector has some defects.
●
While it running, don’t touch the metal housing to avoid being burned!
●
Do not mount the projector directly on inflammable surface.
●
Do not project the beam straightly on combustible items and the minimum distance between the projector and
illuminated items is 8m.
●
A projector should be installed with good ventilation and the minimum distance between the projector and walls
is 50cm. At the same time, please ensure the fans and air inlets and outlets are workable.
●
Do not let the front lens under sunlight or other strong light sources at any angle, otherwise the danger
of fire can be caused by the focused beam by the lens inside a projector.
●
The product meets The General Technical Requirements and Standards for Recycle and Use Of Expired
Appliance and Electronic Products.
●
When the product meets disposal standards and needs to be disposed, a client needs to dispose and recycle it.
2. INSTRUCTIONS
●
CLEANING AND MAINTENANCE
Keeping a projector is necessary and the dust, oil and smoke should not accumulate on or in it, otherwise its light output will be greatly
compromised. Regular cleaning will ensure light output at maximum and reliable running during its whole life span. It’s advised to use
soft cloth with good quality detergent. Under whatever circumstances, it should not use alcohol or other solvent.
For the accumulation of oil and smoke on the front lens, thus sharp decrease in light output, the front lens should be cleaned once every
week. Cooling fans cleaned once every month. Internal items inside the projector should be cleaned once every year using vacuum or
blower. Color filters, rotators and internal mirrors should be cleaned once every month.
Regular inspection of air filters and clean them before they fully blocked. Clean air filters at the bottom of the base. Please vacuum or
compressed air to clean and put them back after cleaning.
●
Before any maintenance and cleaning, please ensure the project is off the power
●
Only qualified person is allowed to do maintenance
●
During maintenance and before maintenance, the projector must be off power.
●
To avoid internal damage, sun light or other light mustn’t penetrate into the projector via front lens whether it runs
or not
●
Do not use alcohol or other organic solvent to clean the housing to avoid damag
●
Do not use any solvent with chemical elements to clean color filters or hot mirror.
. Hot mirror should be cleaned every 3 days and coated with