PR Lighting PR-2345A, User Manual

Page: 10 / 22

10
6. OPERATION MENU
Menu interface:1. DMX address 2. Config 3. Manual control 4. Scene 5. System settings 6. Information
1)
Explanations for menu functions. Push any key to enter into option interface while at initial display
Main menu 1
st
level menu 2
nd
level menu Description
DMX
address
DMX Setting 001-512
Select “DMX address”option
1
）
After ENTER key pushed
，
the current DMX address will
be shown
2
）
Push UP or DOWN key to set address
3
）
Push ENTER key to save and exit. Push ESCAPE key to
exit directly
Config
Channel mode
14CH
Short Mode
Select ”Channel mode” option
1
）
After ENTER key pushed, current channel mode will be
shown(16CH for standard mode,14CH for short mode)
2
）
Push UP or DOWN key to select either of the options
；
3
）
Push ENTER key to save the mode selected. PUSH
ESCAPE key to go back to the upper level menu and
cancel the mode selected
16CH
Standard mode
Lamp Striking
Auto lamp-on
Select “Lamp Striking”Option
1
）
Push ENTER key to show current mode(Auto lamp-on,
lamp-on by DMX control).
2
）
Push UP or DOWN key to select either of the options.
3
）
Push ENTER key to save the mode selected. PUSH
ESCAPE key to go back to the upper level menu and cancel
the mode selected
Lamp-on by DMX control
Pan & Tilt
Pan Invert
Select“Pan and Tilt Invert”option
1
）
Push ENTER key and the options will be shown on the
display
（
Open or Close
）
2
）
Push UP or DOWN key to select either of the options.
3
）
Push ENTER key to save the selected. PUSH ESCAPE
key to cancel the setting.
Tilt Invert
Pan and Tilt swap
Select“Pan and Tilt Swap”option
1
）
Push ENTER key and the options will be shown on the
MASTER SLAVE SLAVE
OFF
ON
FUSE 250V 8A
POWER IN POWER OUT DMX IN DMX OUT OFF
ON
FUSE 250V 8A
POWER IN POWER OUT DMX IN DMX OUT OFF
ON
FUSE 250V 8A
POWER IN POWER OUT DMX IN DMX OUT
OUTPUT INPUT OUTPUT INPUT
DMX
terminator