PR Lighting AQUA 380 BWS, Manual

Page: 5 / 28

5
●
TROUBLESHOOTING
PROBLEM ACTION
The projector doesn’t switch on

Check the fuse on the power socket.

Check the lamp.
The lamp is on but the projector doesn’t respond
to the controller

Make sure that the fixture’s start address is right

Replace or repair the XLR signal cable.
The projector functions intermittently

Make sure the fan is working well or fans and their shields are not blocked
Beam appears dim, Low in brightness

Make sure the lamp is within its lifespan

Remove dust or grease from the lenses.
The project image appears to have a halo

Carefully clean the lamp, optical lenses and other components.
Heavily Defective Beam

Check if lens are in good condition(not cracked)

Clean dust or grease on the lens.
3. APPEARANCE
4. INSTALLATION
●
RIGGING
Head
Clamp
Please run the safety cord
through its hole for safety
Arm
Base
Safety cord