PR Lighting AQUA 380 BWS, Manual

Page: 19 / 28

19
100-129 Reserved
130-139
Lamp On
140-149 Pan & Tilt Reset
150-159 Color System Reset
160-169
Gobo Wheels Reset
170-179 Dimmer/Shutter Reset
180-189 Frost/Focus/Prism Reset
190-199 Reserved
200-209 Total Reset
210-229
Reserved
230-239 Lamp Off
240-255
Reserved
Note:
1. The projector can’t be turned on within 1 minute after the lamp-off.
2. Fan error can cause lamp-off.
3. Note: "Speed Mode" means Pan and Tilt will move from Point A to Point B at their respective maximum speeds."Time Mode"
means both Pan and Tilt will arrive at designated point at the same time. It's advised Time Mode be used if the projector runs circles or
in oblique lines.
4.If both rotating gobo wheel and fixed gobo wheel are to be used, the former is prior to the latter.
.
8. ERROR INFORMATION
The system can detect some errors during the reset, if displayed, touch the logo to view the error.
The error messages are as follows:
Name Type Correction
Pan
Timeout/magnet Sensor/Encoder Check if wiring, positioning parts and motors are normal
Tilt
Timeout/magnet Sensor/Encoder Check if wiring, positioning parts and motors are normal
Color Wheel Timeout Check if wiring, positioning parts and motors are normal
Fixed gobo wheel Timeout Check if wiring, positioning parts and motors are normal
Rot. Gobo Wheel
Timeout Check if wiring, positioning parts and motors are normal
Rot. Gobo Rotation
Timeout Check if wiring, positioning parts and motors are normal
Dimmer Timeout Check if wiring, positioning parts and motors are normal
Prism Timeout Check if wiring, positioning parts and motors are normal
Prism Rotation
Timeout Check if wiring, positioning parts and motors are normal
Effect wheel
Timeout Check if wiring, positioning parts and motors are normal
Effect wheel Rotation Timeout Check if wiring, positioning parts and motors are normal
Focus Timeout Check if wiring, positioning parts and motors are normal
Lamp Fan Error Check if fan and its wiring are normal
Color Fan Error
Check if fan and its wiring are normal
Head Fan Error Check if fan and its wiring are normal
Pan and Tilt Board Error Check signal wire
Driver Board 1 Error Check signal wire