14
SENSOR BREAK OUTPUT POWER%
(Available for PID control only)
In case of Thermocouple / RTD broken or disconnected, the
controller outputs this power value under open loop condition.
INPUT/OUTPUT CONFIGURATION PARAMETERS : PAGE-12
Refer Table 6.1 for parameter description & settings.
Table 6.1
Parameter Description
Settings
(Default Value)
CONTROL ACTION
Select appropriate Control Algorithm suited for process
requirement.
CONTROL LOGIC
Select Reverse (
heat
logic) or Direct (
cool
logic).
PV UNITS
(Available for Thermocouple / RTD Inputs)
Selects temperature measurement units in °C or °F.
INPUT TYPE
Select Input type in accordance with the type of Thermocouple or
RTD or Sensor / Transducer Output (mA/mV/V) connected for
process value measurement.
Refer Table 6.2
(Default : Type K)
(Default : C)
°
°F
°C
(Default : Reverse)
Reverse
Direct
(Default : PID)
On-Off
PID
Pulse
User Manual
neuro 102 Plus
Section 6
SETPOINT LOW LIMIT
Set minimum permissible value for control setpoint.
(Default : -199)
Min. Range to
Setpoint High for the
selected Input Type
SETPOINT HIGH LIMIT
Set maximum permissible value for control setpoint.
Setpoint Low to
Max. Range for the
selected Input Type
(Default : 1376)
0 to 100 %
(Default : 0 %)
Input Type
Settings
Default
0 to 20 mA
0.00 to Signal High
0.00
4 to 20 mA
0 to 80 mV
Reserved
0 to 1.25 V
0 to 5 V
0 to 10 V
1 to 5 V
4.00 to Signal High
0.00 to Signal High
0.0 to Signal High
0.000 to Signal High
0.000 to Signal High
0.00 to Signal High
1.000 to Signal High
4.00
0.00
0.0
0.000
0.000
0.00
1.000
SIGNAL LOW
(Available for DC linear mV/V/mA Inputs only)
The transmitter output signal value corresponding to PV RANGE
LOW parameter value. Refer
Appendix-A : DC Linear Signal
Interface
for details.
