High Idle/Valet Switch
6
STEP 11
Push in the white tab on both sides
to remove the blue connector, so
that the pin can be inserted fully
into the #71 terminal.
STEP 12
Insert the blue or green wire from
the High Idle switch into the #71
location.
STEP 13
Installation is now complete.
reassemble by reversing the
disassembly process.
Operation:
With the truck in PArK, turn ON the
PPE High Idle switch.
Next turn ON the cruise control.
The cruise control’s speed up and
slow down buttons (+) (-) will now
control the engine’s idle state.
