High Idle/Valet Switch
5
STEP 9
With the clips removed, you can now pull up on the cover and access the
computer. You will need a socket to remove the blue wiring harness. The
harness on the left is the white one, which you will not need. Unscrew the
nut on the right-hand side to release the blue wiring assembly.
STEP 8
Access the terminals. For this application you will need terminal # 71.
remove the black plastic cover off of the computer. Loosen clips. There
is one in the front and one in the back.
BLUE SIDE
WHITE SIDE
STEP 10
Open the back of the connector.
Unplug connector by squeezing the
sides of the connector with your
fingers to disconnect.
