25
SCREEN TO ENABLE / DISABLE THE PANIC FUNCTION IS INTENDED TO ENABLE THE
ALARM FUNCTION OF THE PANIC BUTTON OF THE CONTROL
Figure19 - Enable/Disable the Panic Function
Description of how the panic function works when it is enabled.
When the board receives a command from the transmitter in which the pressed key is defined as a panic
button with pulse only Safe Access1, it will trigger the gate for an opening and/or closing cycle, and the cou-
ntdown of the timer defined by the time user delay for triggering the panic alarm.
As the delay time for triggering the panic alarm must always be defined by the user longer than the time of
the opening and closing cycle of the gate, and after closing the cycle with the gate closed, even so, the timer
will be counting down to the triggering of the panic alarm, and if
the user does not cancel this timer then panic will be triggered. To cancel the countdown after the end of
the cycle with the gate closed, the panic button must be pressed again. With the gate closed and the timer
cancelled, then the next command of the key defined as panic will start the SafeAccess1 cycle with the panic
timer on and counting down.
PANIC FUNCTION
Disabled
Enabled
I C
P A N
x
x
x
[
x
x
]
x
x
x
x
x
x
