page no. 23 of 36
Vision Mini
User Instructions Doc Ref M608 issue 1.0 June 2021.
Access to the electrical panel
A
Electrical panel covering
B
Upper grid
C
Front panel
D
Fixing screws
A
3
B
C
D
Access to the electrical panel is only permitted to qualified
personnel.
Before doing any work, make sure that the supply power
is disconnect.
To access:
– remove the cosmetic panels (if fitted)
– see chapter
"Removal of aesthetic panels and
grilles"
p. 27
To access the connections:
– unscrew the screws of the electrical panel
– remove the electrical panel cover
Connection
The appliance leaves the factory fully wired and equipped
with a cable with Y-type plug for connection to the power
supply. To power the unit simply insert the plug into a
suitable socket protected by a circuit breaker.
1.
Main switch
2.
Y-type socket
3.
Plug supplied with the device
1
2
3
If necessary, it is possible to remove the factory cable with
plug and connect the power supply directly to the terminal