7
Turn the key switch to position ON (I). In this position the machine can already move
backward and forward as described below. Next press button (control panel) then button
(brush). At this point the water dosage and vacuum will start automatically. If desired, they can
be switched off individually with (water) and (vacuum ) buttons.
The charge level of the batteries is represented by the indicator
When indicator is on, the water recovery tank is full.
When this indicator is lighted, the vacuum and the solution are turned OFF. The recovery tank must
be emptied and the indicator reset by turning the main panel power control switch or the key switch
OFF and then back ON.
Particularly dirty floors
: Certain floors or environments require particular attention or even a second
pass with the cleaner
Pull lever M8, (page 9) the machine will go forward, keep the button, (forward/reverse) pressed
and the machine will go backward.
Release M8 (page 9) to stop the machine.
Regulate the forward speed with potentiometer
