Powr-Flite PAS20DX, Operator'S Manual And Parts List

Page: 14 / 16

TROUBLES POSSIBLE REASON REMEDIES
The machine doesn’t move
The battery is low
Charge the battery
Check every element of it only if you own the right
instrument
The connector of the traction motor is disconnected or oxidized Check the connector
Defective handle microswitch (walk behind machine) Check the microswitch and change it
Motor carbons oxidized or consumed Clean or change the motor carbons
Traction electronic card is fault After contacting the technician change the card
The brushes plate doesn’t move
on the floor
The machine doesn’t move Check the traction card
The brushes run and stop
repeatedly
Discharged batteries
Check the batteries
Check every element of it only if you own the right
instrument
The brushes don’t rotate Motor carbons oxidized or consumed Clean or change the motor carbons
The fuse is burned Change the fuse
The brush power switch is oxidized or burned Clean the power switch and/or change it
The vacuum motor doesn’t work
The motor power switch is oxidized or burned Clean the power switch and/or change it
The fuse is burned Change the fuse
The scrubber doesn’t recover all
the water
Recover tank full Discharge the tank
The squeegee is lifted from the floor Lower the squeegee to the ground
The squeegee hose is not free inside Check and free the hose from everything is inside
The vacuum motor filter is dirty Clean the filter
Squeegee blades consumed or the squeegee itself has to be adjusted Change the rubbers and adjust properly the squeegee
The squeegee doesn’t move to
the floor (Automatic movement
machines)
Check the vacuum motor switch on the control panel Change the switch
The clean water doesn’t drop
The clean water filter dirty Clean the filter (inside the clean water tank)
TROUBLESHOOTING