Page 52 FB8X Service Manual Rev. C, 9/28/10
S E R V I C E A N D C A L I B R A T I O N P R O C E D U R E S
6
6 . 7 S w i t c h e s
6.7.1 Removing the Carriage Home Switch
1. Remove the Right and Left Covers.
2. Remove the Cooling Rack.
3. Remove the M3x10 SH CAP Screw using a
2.5mm Hex Key (fig 1).
4. Unplug the Carriage Home Switch from the
Wire Harness from inside the machine.
Installing the Carriage Home Switch
1. Insert the Carriage Home Switch wire
through the hole in the Right Side Plate and
connect it to the Wire Harness (fig 2).
2. Attach the Switch to the Right Side Plate
using a M3x10 SH CAP Screw and a 2.5mm
Hex Key.
3. Reinstall the Cooling Rack.
4. Reinstall the Right and Left Covers.
Fig 1
Fig 2
After replacing the Carriage Home Switch, perform the following tasks:
TASK 1
Check the switch in the CHECK SENSORS menu.
TASK 2 Recalibrate the Carriage.
TOOLS REQUIRED: #1 & #2 Phillips Screwdrivers, 2.5 Hex Key