F A S T B A C K ® M O D E L 1 5 x s E U S E R ’ S M A N U A L , R E V . C — 7 / 1 9 / 0 2
5
5
II
F I R S T T I M E S E T U P
A. What’s Included
Your Fastback® and accessories are shipped in one box. If any
items are damaged or missing, contact your dealer immediately.
Inside the box:
•
The Fastback® Model 15xsE binder
•
FB15xsE Accessory Box, which contains:
- a Smaller Accessory Kit (includes a User’s Manual,
Key Operator’s Manual, Heat Protective Glove,
Wire Tweezers, Superstrip™ Color Fan, and
Comp Strip™ Color Fan)
- Power Cord
- Superstrip™ Assortment Pack
- Plastic Book Fence
- Cooling Rack
- Machine Access Key
- Cooling Rack
B. Setting Up
1. With the help of someone else, remove the binder from the
box.
2. Position the machine on the desk, table, or counter where it
will reside. We recommend placing your binder in an area
about two by three-and-a-half feet, at desktop height.
3. Remove the plastic book fence from the cardboard liner in the
box.
4. Attach the fence to the Fastback® binder by aligning the two
slots in the plastic fence with the metal tabs on the book clamp.
Hold the fence on each side, and insert the tabs firmly into the
slots.
5. Unpack the cooling rack and place it on top of the rear of your
Fastback® binder. The long, bent metal tab under the front of
the rack should be inserted in the slot above the four printed
icons.
C. Plugging In
1. The power switch is located at the lower left on the front of
the machine. Before plugging in the Fastback® binder, make
sure the power switch is off by depressing the “O” side of the
power switch.
2. Plug the power cord into the outlet on the back of the
machine. Then connect it to a standard, grounded 230V
electrical outlet.
!
I M P O R T A N T N O T I C E :
Some types of plastic
covers will melt in the Fastback® binder and cause problems.
Please use only the plastic cover recommended by your dealer,
or transparent sheets labeled for use in copiers.
F I R S T T I M E S E T U P
