M O D E L
1 1
K E Y
O P E R A T O R
’
S
M A N U A L
15
D I A G R A M A
/
S C H É M A
/
F I G U R E
8
V I
S E T T I N G T H E B I N D E R S T R I P
™
E N D P O S I T I O N
The alignment of the Binderstrip
™
on the spine of a Fastbound
™
document
is set by the position of the small metal positioning arm.The positioning
arm is located on the right end of the cool platen (figure 1 page 3).To
change or reset the Binderstrip
™
end location:
1.
Using a Philips head screwdriver, loosen the mounting screw of the
positioning arm (figure 8).
2.
Move the positioning arm in the direction and the same distance you
would like the Binderstrip
™
positioned on the spine of the Fastbound
™
document.
3.
Tighten the mounting screw.
4.
Close the machine by pressing down on both sides of the cover until
the latch clicks and locks in position.
