PX-2404M User’s Manual - Rev 1.6
2
CONTROL AND INDICATORS
1. Charging Status Display LED (3 x LED’s)
Fault – RED (Refer to LED STATUS INIDACTOR TABLE on Page #4)
Charging Process - Orange
Fully Charged - Green
2. ON / OFF Switch
Main Power Switch for the Charger
RECOMMENDED BATTERY CAPACITY
The maximum recommended battery Capacity for PX2404M (4 Amp) Battery charger is
44AH
.
We always recommend that you check the Battery Manufacturers specifications before using
this charger.
OPERATING INSTRUCTIONS
The PowEx Battery Charger is easy to operate and requires no technical experience.
1. Connecting the Battery charger to your Battery
(a) Simply plug the charger lead into the fly lead from your battery (Wheelchair/scooter),
ensuring the pins are lined up correctly and not stressed.
2. Connect the Battery Charger to the Mains power (240Vac) and Turn ON.
(b) Switch the Battery Charger ON and the Charger will automatically start.
(Note: If the Fault Indicator LED illuminates Red, please check your connections.
Refer to Trouble Shooting Page / LED STATUS INDICATOR TABLE for further
information)
