PX-2404M User’s Manual - Rev 1.6
1
Automatic Battery Charger
Microprocessor controlled with safety timers at every stage
Input: 220-260Vac / Output: 24Volt DC (4 Amps)
User’s Manual and Important Safety Information
Model: PX-2404M (24 Volt – 4 Amp) – Suits Motorised / Mobility Scooters
- - - - - - - - - - - - - - - - - - - WARNINGS - - - - - - - - - - - - - - - - - - - - -
•
Read instructions prior to use. These instructions form part of the warranty conditions.
•
This appliance must not be used or played with by infirm persons or children.
•
If using Generator power, please use a Surge Protector to protect the unit from Voltage
Spikes.
•
Do not attempt to use the charger if it has been dropped or damaged.
•
Never attempt to charge a damaged battery, frozen battery or non-rechargeable battery.
•
Do not use the charger in a closed area or poorly-ventilated area.
•
Never smoke, use an open flame, or create sparks near a battery or charger during charging
operation as this may cause an explosion / explosive gas.
•
Do not operate the charger if the cord or plug is damaged.
•
Do not disassemble the charger. Take it to a qualified person if a repair is required. (No
serviceable Parts inside)
FEATURES
Congratulations on purchasing an AS/NZS Approved PowEx Automatic Switching Mode Battery
Charger and Maintainer.
•
High frequency, High Efficiency Switching Mode
•
Microprocessor
controlled
•
Suits all Lead Acid Type Batteries. (Conventional, AGM & Gel)
•
Heavy-duty cables with Amphenol (Cannon) ‘
XLR’ type connector
