26
DB-750X
7
General Setting
1.
Press
key to enter function menu.
2.
Turn the main band selector knob to
choose No. 36 menu. The LCD displays "
SHIFT
".
3.
Press the main band selector knob to enter function setup.
4.
Switch the main band selector knob to choose desired value.
Available offset frequency for this transceiver is
0-100 MHz.
5.
Press the main band selector knob or
key to store value and
return to function menu. Press
key or hold selector knob for 1
second to store setup and exit.
1.
Press
key to enter function menu.
2.
Turn the main band selector knob to
choose No. 37 menu. The LCD displays "
dISPLAY
".
3.
Press the main band selector knob to enter function setup.
4.
Switch the main band selector knob to choose desired value.
FREQ:
The radio displays channel number
+ frequency in channel mode.
Press
key to change to VFO
mode.
CH:
Displays only channel number.
NAME:
In channel mode, it displays the
channel number and channel name if the current channel is
programmed with a name. Otherwise, it display the channel number
and frequency. Press
key to change to VFO mode.
5.
Press the main band selector knob or
key to store value and
return to function menu. Press
key or hold selector knob for 1
second to store setup and exit.
oFFSET FREqUEncY SETUp
DiSplAY MoDE SETUp
Before using the priority channel scan function, the edited channel must be
programmed as "P SCAN".
1.
Press
key to enter function menu.
2.
Turn the main band selector knob to
choose No. 35 menu. The LCD displays "
SCAN M
".
3.
Press the main band selector knob to enter function setup.
4.
Switch the main band selector knob to choose desired value.
MEN:
Channel Scan; the transceiver will
scan all the channels.
MSN:
Priority Channel Scaning; the transceiver will only scan the
priority channel.
5.
Press the main band selector knob or
key to store value and
return to function menu. Press
key or hold selector knob for one
second to store setup and exit.
pRioRiTY chAnnEl ScAn
4.
Switch the Main band selector knob to
choose desired value.
TIME:
it pauses five seconds after detecting a matching signal, then
resumes scan.
BUSY:
it pauses after scanning a matching signal, then resumes
scan after the signal disappears for 2 seconds.
SECEdE:
It Stops after scanning a matching signal, and exits scan.
5.
Press the Main band selector knob or
key to store value and
return to function menu. Press
key or hold selector knob for one
second to store setup and exit.
NOTE
