34
DB-750X
1.
Use optional MBXCLON cloning cable; connect the cable between the data jacks on both master and slave.
2.
Power on slave unit.
3.
On master unit hold top
key while powering on and hold this key until LCD displays
“CLONE”
.
4.
On master unit turn left volume key down to 0.
5.
On master unit hold
key till beep is heard, release, then short press
key to activate cloning.
6.
While cloning, both master and slave units will display
“CLONE XX”
where “XX” stands for amount of data being cloned.
7.
When master unit displays
“CLONE”
again and the slave unit repowers on, cloning is complete.
Cable Clone
This feature will copy the programmed data and parameters from the master unit to slave units. It copies the parameters and memory program settings.
To clone multiple radios, switch the slave unit with another radio by connecting the clone cable in the data jack. Turn the new slave radio on and then repeat step 5
above. If the data is not successfully transmitted, turn off both units. Make sure the cable connection is correct and repeat the entire operation from the beginning.
NOTE
FAcToRY RESET
If your radio seems to be malfunctioning because of wrong operation or setup, this function will be able to resume all setup and channels to factory
default.
Hold the top
button while powering on the radio. All channel and function setups will resume to factory default. All memory channels will be erased.
10
Clone Cable (MBXCLON)
�
V/M
HM
SCN
LOW
LOW
V/M
HM
SCN
SET
TV/SOL
�
V/M
HM
SCN
LOW
LOW
V/M
HM
SCN
SET
TV/SOL
