PowerWalker VFI 1000T LCD, Manual

Page: 39 / 43

36
12. Software Installation
WinPower is UPS monitoring software, featuring user-friendly interface to
monitor and control your UPS. This unique software provides complete
power protection for computer system while power failure. With the
software users can monitor any UPS status on the same LAN.
Furthermore, a UPS can provide security protection for more than one
computer on the same LAN at the same time, such as shutting down
system in security, saving application data and shutting down the UPS
when power fails.
Software Installation on your PC:
Connected by USB to a PC or notebook, the Software enables communication
between the UPS and the computer. The UPS software monitors the status of the UPS,
shuts down the system before the UPS is exhausted and can remotely observe the
UPS via the Network (enabling users to manage their system more effectively). Upon
AC failure or UPS battery low, UPS takes all necessary actions without intervention
from the system administrator. In addition to automatic file saving and system
shut-down functions, it can also send warning messages via pager, e-mail etc.
•
Use the bundled CD and follow the on-screen instructions to install the software
WinPower.
•
Enter the following serial No. to install software: 511C1-01220-0100-478DF2A
•
After the software is successfully installed, the communication with UPS has
been established and an green icon will appear in the system tray.
•
Double-click the icon to use the monitor software (as above).
•
You can schedule UPS shutdown/start-up and monitor UPS status through PC.
•
Detail instructions please refer to the e-manual in the software.
Check www.powerwalker.com/winpower.html from time to time to get the latest
version of monitoring software.