13
3.3 Gas system assembly
Only applicable if the gas system is supplied by PowerUP or its
official partners.
To connect the regulator to the
cylinder, two (2) number 28
wrenches are required.
Please follow these instructions.
1. Inspect cylinder(s), regulator,
hose and quick connector
for any physical damage.
2. Ensure threads and quick
connectors are clean and
undamaged.
3. Ensure the valve is in the closed
position.
4. Place one of the wrenches
around the valve on the top
of the cylinder to prevent
it from moving.
5. Place the regulator on top of the
cylinder, and hand-tighten the
brass nut in a counterclockwise
motion.
6. Use the second wrench
to tighten the brass nut.
7. Inspect the gas system
for leakage (refer to 4.4).
H
2
REF004_1
REF004_2
REF004_3