![background image](http://html.mh-extra.com/html/tecsun/pl-880/pl-880_quick-start-manual_1072928001.webp)
Function
Description
Radio
State
Key
Bands
Mode
Instructions
Additional
Features
Enables Muting
Threshold
& DNR features
for MW,
LW & SW
On
4
AM,
LW,
SW
LSB, USB
1. Press and hold the 'USB/NORM' or 'LSB/NORM' key until
'SYNC' appears.
2. Press the key again once to change back.
Bandwidth
Scroll BW
On
AM BW
-‐ -‐
-‐ -‐
1. Press the AM BW button.
2. Immediately turn either the main or fine tuning control.
Battery low
voltage
shutdown
level
Sets the Li-‐ion
battery low
voltage
shutdown level
to 3.4v, 3.5v,
3.6v or 3.7v
Off
4
-‐ -‐
-‐ -‐
1. Press and hold key '4' and adjust with either tuning knob.
2. Press key '4' to save the setting.
Calibrate
LSB/USB
Allows
calibration of
each sideband
On
Snooze
AM,
LW,
SW
LSB, USB Hint: Although this may calibrate USB & LSB for the displayed
band, you may find
that on a different frequency band you have
to recalibrate. You can carry out this procedure on USB or LSB
as each sideband has its own calibration value.
1. Tune in a strong AM (MW, LW) or SW station.
2. Press 'USB/NORM' to switch to upper sideband.
3. Adjust the fine-‐tuning until it's zero-‐beated and the pitch
matches AM.
4. Press and hold the 'SNOOZE' key until the '00' correction
value appears, calibration is now complete.
Display Light
Toggles the
display light ON
(AUTO) or OFF
Off
5
-‐ -‐
-‐ -‐
Hint: This is an alternative to switch the display light ON or
OFF, rather than using the slider switch on the right hand side
of the radio, although 'OFF' in this mode is permanently off and
'ON' is the same as 'AUTO OFF' using the slider switch.
1. Press key '5' to toggle the display light ON or OFF.