4
5
Operation
Move the load by pulling the hand chain or by pushing the load.
Do not stand under a raised load.
Media / Recommended lubricants
Recommended lubricant for greasing points:
- Meshing, drive pinion
Multi-purpose grease DIN 51825 T1 K2K
After use the lubricant must be disposed of in compliance with the statutory regulations.
Eye connection/direct connection
The eye connection can be rotated 90° to allow direct connection between hoist
and trolley, without use of hook/
eye. Such direct connection must only be made by authorized distributor.
If the product is modified in any way, or if it is combined with a non-compatible product/component, we take no responsibility for the consequen
-
ces in regard to the safety of the product.
Inspection and servicing instructions
Safety instructions
Remove all the strain from the girder trolley by suitable means before carrying out inspection and servicing work
Instruction Grey Label
To change your new POWERTEX Trolley to Black Line:
If the product should be used in dark environments, add the grey label on the product’s nameplate like this.
The data on the nameplate should ALWAYS be visible, and must NOT be covered.
Disposal:
After the trolleys have been taken out of use, the parts of the block and tackle
are to be recycled or disposed of in compliance with the statutory regulations.
Inspection intervals
Conduct an expert inspection
before commissioning
Servicing and inspection work
Daily
Visual inspection of rollers (for signs of cracks and deformation)
Visual inspection of the chain
Function of the unit
Adjustment range, visual inspection of the track width lateral play
Quarterly
The rollers are fitted with ball bearings that are lubricated for life
Every six months
Check the condition of the hand chain (remove sharp edges as they constitute an injury risk)
Check screw connections.
Grease the meshing on the rollers and drive pinion.
Every year
Check that the model plate is completely legible.
Have the annual test carried out by an expert
The service life of the unit is limited, worn parts must be replaced promptly by an expert.
Contact your dealer for spare parts in general.
Problem
Cause
Servicing and inspection work
The girder trolley can only be
moves with difficulty.
No grease in the bearings and meshing.
Visuel inspection of rollers (for signs of cracks or deformation)
Visual inspection of the chain
Function of the unit
Adjustment range, visual inspection of the track width lateral play
Dirt or other foreign bodies on load girder.
Girder deformed
