4
7. Carefully set the assembly up onto the casters.
Figure 8
8. Assemble the handle to the collection body with
two 5/16" x 1" Phillips head screws, use Phillips
screwdriver to tighten.
Figure 9
Handle
5/16" X 1"
Phillips Head
Screws
9. Assemble the 90 degree elbow as shown, use Phillips
screwdriver to tighten.
Figure 10
Screw
90 Degree Elbow
10. Push the upper bag support into the holes of the
collection body as shown.
Figure 11
Collection
Body
Upper Bag
Support
11. Thread the bag clamp through the hemmed opening
in the bottom of the filter bag.
Figure 12
Bag Clamp
Hemmed
Opening
Filter
Bag
12. Place the filter bag over the upper bag support on to
the collection body and fasten the bag clamp.
13. Place the adhesive foam strip (supplied) around the
lower opening of the collection body.
Figure 13
Bag Clamp
Collection
Body
Filter
Bag
Adhesive
Foam Strip
14. Place the clear plastic collection bag over the lower
opening of the collection body, secure in place with
the second bag clamp.
Figure 14
Plastic
Bag
Collection
Body
Bag
Clamp
ASSEMBLY
