background image

PRODUCT

SPECIFICATIONS

Horsepower (Maximum Developed) . . . . . . . . . . . . . 1/6 HP
Voltage   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120 V
Hertz  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 Hz
Controls . . . . . . . . . . . . . . . . . . . Manual or Remote Control
Number of Speeds   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Air Flow (CFM)  . . . . . . . . . . . . . . . . . . . . . . . . .300/350/400
Outer Filter   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Micron
Inner Filter  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Micron
Filtration Timing . . . . . . . . . . . . . Auto Off, 1 HR, 2 HR, 4HR
Impeller  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Squirrel Cage
Sound Rating @ 3 Feet   . . . . . . . . . . . . . Hight Speed 69dB

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Medium Speed 67dB

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Low Speed 62dB 

MOTOR

SPECIFICATIONS

This air filtration system is supplied with a 1/6 HP motor 
installed. The 120 Volt AC universal motor has the 
following specifications:
Horsepower (Maximum Developed) . . . . . . . . . . . . ..1/6 HP
Voltage   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .120
Hertz. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60

TABLE OF CONTENTS 

 

SAFETY RULES 

1

 ASSEMBLY 

2

Unpacking
Installation
Power Source 
Grounding Instructions  
Extension Cords

 OPERATIONS 

5

ON/SPEED Control
Filtration Timing
To Turn the Unit OFF

 MAINTENANCE 

6

Changing the Filters
Fuse Replacement
Remote Control Battery Replacement

 TROUBLESHOOTING  7

 

 PARTS  ILLUSTRATION 

8    

& LIST

 WARRANTY 

10

 

      SECTION   

 

 

      PAGE

Summary of Contents for AF4001















Reviews: