Page 15 — English
TROUBLESHOOTING
PROBLEM
CAUSE
POSSIBLE SOLUTION
Paint pattern is weak or uneven
Pressure is set too low
Pistol-grip sprayer or intake tube filter is
clogged
Intake tube is loose at inlet valve
Spray tip is worn
Material being sprayed is too thick
Loss of pressure
Turn variable pressure control to a higher
setting
Clean or replace filters
Tighten tube fitting
Replace spray tip
Follow material manufacturer’s directions
and thin material as needed
See Cause/Possible solutions for
Pressure
setting is too low
, and
Motor seems to
be running properly but pressure drops
when pistol-grip is triggered
NOTE: FIGURES (ILLUSTRATIONS) START ON PAGE 16
AFTER FRENCH AND SPANISH LANGUAGE SECTIONS.