powersoft D-Cell504 IS, User Manual

Page: 4 / 39

powersoft_dcell504_uguide_en_v4.0 www.powersoft-audio.com
4
D-Cell504
User Guide
!

The “IS” version of the device includes IEC mains connection as shown in the figure below:
The fuse included is of the type 3.15A 250V 5x20 FAST. For safety reasons, always replace this
component with one of the same type.
The replacement has to be made only by Powersoft’s authorized personnel.

The integration of the device in any system must allow an easy access to the mains connection and the switch.

The switch is on OFF state when the “O” symbol is pressed down, and is in ON state when the “I” symbol is pressed
down.
ONLY FOR IS VERSION WITH POWERCON CONNECTION TO MAINS:

The “IS” version is also available* with PowerCon in and out connection as shown in the figure below:

The maximum output current that can be drawn from the PowerCon output connector is 7A / 1600W
*not all the models are available with PowerCon in and out: contact Powersoft for more info