PowerSmith PLCL360T, Operator'S Manual, Page: 6 / 16

6
English
Pull the Quick Release Lever outward and insert the tool
into the square opening located on the top of the tripod.
Release the Quick Release Lever to lock the tool in place.
Turn the laser on and make final height adjustments using
the telescoping height adjustment.
APPLICATIONS
CHECkING ALIGNMENT (FIG 2 B)
The tool can be held against the wall to check alignment.
For leveling horizontal and plumb vertical alignment,
activate the self-leveling mode and make sure the
Leveling Indicator is green.
ALIGNMENT ABOVE THE MAXIMUM
TRIPOD HEIGHT (FIG 2 C)
Project a level horizontal line. Measure up at two points
from the line to create a second parallel line.
INSTALLING WALL TILE (FIG 2 D)
Determine the height at which you want the first row of
tile to begin. Align the intersection of the cross horizontal
and vertical laser lines at that location. Install the first tile
so it aligns with both the horizontal and vertical laser lines.
Continue installing the tile along either the horizontal or
vertical laser line.
MAINTENANCE
WARNING:
Do not turn the laser on while
cleaning the lens. Serious injury to eyes could result.
• Keep the laser lens clean. A dirty lens will affect the
laser beam operation. Clean the lens with a moist
cotton swab. Clothes with nylon content could scratch
the lens cause the laser to operate incorrectly.
• Clean the tool housing with a moist cotton cloth.
Use only water. Do Not use cleaners, solvents or
compressed air to clean the tool.
• Never immerse or let liquid get inside the tool.
• Dry the tool with a cotton lint free cloth and allow to dry
completely before using or storing the tool.
This product is warranted free from defects in material and
workmanship for 2 (Two) years after date of purchase. This
limited warranty does not cover normal wear and tear or
damage from neglect or accident. The original purchaser
is covered by this warranty and it is not transferable. Prior
to returning your product to store location of purchase,
please call the Toll-Free Help Line for possible solutions.
ACCESSORIES INCLUDED IN THIS KIT ARE NOT
COVERED BY THE 2 YEAR WARRANTY.
HELP LINE
For questions about this or any other PowerSmith ™
product,
Please call Toll-Free:
888-552-8665.
Or visit our website:
www.p
owersmithproducts.com
OPERATION WARRANTY