9
ASSEMBLY
Unpacking
1.
Set the shipping crate on a solid, flat surface.
2.
Remove the cardboard packaging, leaving the wooden frame intact.
Attach tow bar to hydraulic tank
1.
Remove the tow bar from wooden frame.
2.
Attach tow bar to the frame next to the hydraulic tank. Make sure the support leg is in down position.
3.
Secure tow bar with two bolts and nuts to lock in position.
4.
Lower the support leg on the end of the tow bar and secure in position with the locking pin.
5.
Remove the wooden frame from around the log splitter.
Rotate beam with hydraulic cylinder and cutting wedge
1.
Remove cotter pin to unlock beam from position behind the engine.
2.
Lift up the beam and rotate 90 degrees clockwise.
3.
Drop down the beam and secure in place with horizontal lock pin.
Support leg
Cotter pin
Horizontal lock pin