- 33 -
By performing regular maintenance on the BNG blind rivet setting tool, you
can ensure flawless operation and prolong its the service life.
General information:
1.
Maintenance work may be performed only by qualified service
personnel.
2.
Original HS-Technik replacement parts must be used.
3.
Document all maintenance work with
- serial number of the tool
- date
- type of work performed
The following maintenance and checks must be performed at regular
intervals and when the tool is heavily soiled.
Check the nosepiece (1) daily for wear and replace if necessary.
Check the compression spring (8) for shortening replace if necessary.
Clean the contacts on the battery and the PowerRiv
®
with alcohol.
The tube guiding the mandrel into in the collection container should be
cleaned daily (by blowing it out carefully from the back with compressed
air) to remove debris and shavings.
The power tool must not be cleaned with fat-solvent agents or water.
Im Martelacker 12 – D-79588 Efringen-Kirchen – Telefon 0 76 28 - 91 11- 0 – Telefax 0 76 28 - 91 11-90
E-Mail: [email protected] – Internet: www.hs-technik.com
