- 35 -
4
Insert the new spacer and tighten it using an
SW14 open-end wrench.
Reassemble the parts in the reverse direction.
Important:
Use the pusher rod (4) that fi ts the spacer.
Remove the chuck jaw housing, chuck jaws,
pusher rod and spring.
Same process at the fast exchange system
Loosen the spacer with an SW14 open-end
wrench.
Same process at the fast exchange system
Im Martelacker 12 – D-79588 Efringen-Kirchen – Telefon 0 76 28 - 91 11- 0 – Telefax 0 76 28 - 91 11-90
E-Mail: [email protected] – Internet: www.hs-technik.com