- 19 -
3. start-up operations
3.1.0. insertinG or remoVinG the Battery
•
To attach the battery, align the battery tab with the groove in
the housing such that it slides easily into place. Always attach the
battery completely so that it locks into place with a click.
• If the battery is not properly attached to the tool, it can become de
tached and cause substantial damage. Never use force when
attaching the battery. If the battery does not slide into place, it is
not correctly aligned. In this case, remove the battery and guide it
once again into the grooves.
•
To remove the battery, press down the clip (1) on the front of the
battery. The battery can now easily be removed (2) by sliding it
forward out of the holder.
1 – Clip
2 – Remove the batterie
1
2
Im Martelacker 12 – D-79588 Efringen-Kirchen – Telefon 0 76 28 - 91 11- 0 – Telefax 0 76 28 - 91 11-90
E-Mail: [email protected] – Internet: www.hs-technik.com
Do not let the tool fall or allow other objects to fall on the device. Protect
it from impact damage. Make sure that the device does not come into
contact with sprayed water or oil.