POWXB30050
EN
Copyright © 2020 VARO
P a g e
|
7
www.varo.com
▪
Do not probe the charger.
▪
The charger is intended for indoor use only.
8 FEATURES
8.1
Li-ion battery (5)
Advantages of Li-ion batteries :
▪
Li-ion batteries have a higher capacity/weight ratio (more power for less heavy, more
compact, battery)
▪
No memory effect (capacity loss after several charge/discharge cycles) like other type
batteries. (Ni-Cd, Ni-MeH ..).
▪
Limited self discharge. (also see chapter : Storage)
8.2
Forward/reverse selector (right/left rotation selector) (2)
Your tool has a forward/reverse selector located above the switch trigger.
CAUTION: To prevent damage to the gearbox, always allow the chuck to come to a complete
stop before changing the direction of rotation or selecting another speed (HI-LO). To stop,
release the trigger switch.
8.3
Variable speed
Your tool has a variable speed switch. The rotational speed and torque will in-/ decrease
equivalently to applied trigger pressure
8.4
LED light (7)
Your tool is equipped with 1 LED light at the front.
8.5 Protection system
8.5.1 Overload protection
When the tool is operated in a manner that causes it to draw an abnormally high current, the
tool automatically stops without any indications. In this situation, turn the tool off and stop the
application that cause the tool to become overloaded. Then turn the tool on to restart.
8.5.2 Overheat protection
When the temperature of the machine is overheated, the machine stops automatically. In this
situation, let the machine cool before turning on again.
9 OPERATION
9.1
Charging the battery pack
The battery pack for this tool is supplied in a low charge condition to prevent possible
problems, therefore, you have to charge the battery before first use.
Note: Batteries will not reach full charge the first time they are charged.
Allow several cycles for the item to fully charge. The battery should only be
charged indoors.
After normal use, about 1 hour of charging time is required for the battery to be fully charged.
The battery pack will become slightly warm while charging, this is normal and does not
indicate a problem.
Do not place the charger in an area of extreme heat or cold. Best is at normal room
temperature. When the battery becomes fully charged, unplug your charger from the power
supply and remove the battery pack from the charger.
