POW8135
EN
Copyright © 2007 VARO – Vic. Van Rompuy N.V. – www.varo.com
P a g e
|
9
Extremely precise cuts can be made using the laser function.
14 CLEANING AND MAINTENANCE
14.1
Maintenance
Keep the machine's air vents unclogged and clean at all times.
Remove dust and dirt regularly from the machine. Cleaning is best done with compressed air
or a rag.
Re-lubricate all moving parts in regular intervals.
Never use caustic agents to clean plastic parts.
14.2
Service department
§
Damaged switches must be replaced by our after-sales service department.
§
If the connecting cable (or mains plug) is damaged, it must be replaced by a particular
connecting cable which is available from our service department. Replacement of the
connecting cable must only be carried out by our service department (see last page) or by a
qualified person (qualified electrician).
15 TECHNICAL DATA
Power
230 V~ 50 Hz
Output
1600W
Operating mode
S6
Idle speed n
0
4800 min
-1
Carbide-tipped saw blade
255 x 25.4 x 2.8 mm
Number of teeth
60
Tilting range
-45° / 0° / +60°
Mitre cuts
0° to 45° to the left
Sawing width at 90°
115 x 90 mm
Sawing width at 45°
75 x 90 mm
Sawing width at 2 x 45°
(double mitre cuts)
75 x 40 mm
Weight
8.8 kg
Laser class
2
Laser wave length
650 nm
Laser output
ss 1 mW
Laser module power supply
2 x 1.5 V Micro (AAA)
16 NOISE EMISSION VALUES
The saw's noise is measured in accordance with DIN EN ISO 3744; 11/95, E Din EN 31201;
6/93, ISO 7960 Annex A; 2/95. The machine may exceed 85 dB(A) at the workplace. In this
case, noise protection measures need to be introduced for the user (ear-muffs).
Sound pressure level LPA
102.5 dB(A)
Sound power level LWA
112.6 dB(A)
Vibration aw
4.51 m/s²
17 WARRANTY
§
This product is warranted as provided by law for a 24 months period effective from the date
of purchase by the first user.
§
This warranty covers all material or production flaws. It does not include: defective parts
subject to normal wear & tear, such as bearings, brushes, cables, plugs or accessories
