11
Operating Instructions
Assembly Instructions
Attach a garden hose to the garden hose adapter on the
back of the power washer unit (D).
Note:
Flush out garden hose before connecting to garden
hose adapter.
Assembly is now complete. Read and observe all safety
instructions before turning on the power washer.
D
13
1. Turn on water supply at the faucet.
2. Make sure the “ON/OFF” switch is in the “OFF”
position. The power switch has international
symbols: On (|) Off (O).
3.
Completely unwind the power cord and plug into a
grounded 120 volt outlet.
4. Release the spray gun safety lock (I) on the spray gun
(H). Point the spray gun in a safe direction and squeeze
the trigger until there is a steady stream of water,
releasing water and air out of the hose. Lock the spray
gun.
5. Turn the power switch to the “ON” (|) position. The
unit will run on for 1 - 2 seconds and shut off. This is a
normal function of the auto-start feature.
6. Begin power washing by squeezing the trigger all the
way into the handle.
7. Release the trigger to stop the power washer.
8. Allow the motor to come to a complete stop before
squeezing the trigger again.
9.
Squeezing the trigger rapidly will cause the auto-start
feature to miss an on/off cycle and may prevent the
washer from turning on. Use slow, deliberate trigger
pulls to avoid this.
10.
ALWAYS
test a small area to avoid damaging the
surface.
Important Initial Startup
Release the spray gun safety lock (K) on the spray gun (J).
Remove spray tips/nozzles form the lance. Point the spray
gun in a safe direction and squeeze the trigger until there is
a steady stream of water, releasing water and air out of the
hose. Then turn the machine to the “ON” position starting
the motor, press and hold the trigger on the spray gun for
30 Seconds to
fl
ush the system of any foreign material that
may block the spray tip or nozzle, causing the machine to
“pulse on and off the pressure switch.” Once completed
insert the spray tip of your choice.
10