PowerPeak FET6702, User Manual

Page: 23 / 52

23
SPEED: Press the MODE key until the pointer locks on to speed. The display shows the current speed during the
workout.
DISTANCE: Press the MODE key until the pointer locks on to distance. The distance of each workout will be
displayed when starting exercise.
CALORIE: Press the MODE key until pointer locks on to calorie. The calorie burned will be displayed when starting
exercise.
PULSE : Press the MODE key until the pointer advances to pulse function and hold of the sensor about 3 seconds
to show out.
SCAN: Display changes according to the next diagram every 4 seconds. Automatically display of the following
functions in the order shown:
TIME-SPEED-DISTANCE CALORIE-PULSE
Specifications
TIME 00:00 – 99:59 MIN
SPEED 0.0 – 99.9 KM/H (ML/H)
DISTANCE 0.00 – 999.9 KM (ML)
CALORIE 0.0 – 9999 KCALs
PULSE 40 – 240 BPM
IMPORTANT ADVICE FOR TRAINING

Before you start the training, consult your doctor. Ask what kind of training is suitable for you. Wrong or
excessive training can cause health defects.

Avoid over exercising. Do not train if you are tired or feeling faint. If you are not used to physical activity, start
the training slowly at the beginning.

Stop exercising immediately if you feel pain or any other troubles.

Pay attention to your breathing during training.

To avoid injuries, begin the training with an extensive warm up and finish it with a cool-down phase. Use the
exercises described in this manual.

Make sure you drink enough liquids during training. Keep in mind that the recommended amount of 2 litres
might increase during physical workout.

Use the product only with sport clothes and suitable shoes, which are equipped with non-slip soles. Avoid
wide clothes, because they can get caught in moving parts of the product.