DO NOT use metal scouring pads.
b.
Make sure Water Tank contains water before steaming. Be aware of the water
level as it depletes while in operation. If you require to top-up water, press the
ON/OFF Button, switch off the appliance and unplug from the wall socket first.
DO NOT top-up water while the appliance in ON. Pour out the water after every
use. Thereafter, ensure that the exterior of the steamer is completely dry before
use.
c.
Place and use the appliance upright on a horizontal, stable, dry and heat-
resistant surface. Damage to the appliance may occur if it is placed on an
incline or decline.
d.
Make sure to remove any label or protective sheet which may prevent its
proper functioning.
e.
(First use)
Add water and fill 80% of the Water Tank with water.
Place the Poaching Tray and Cover (in that order) onto the Heating Base.
Plug the power cable into the wall socket and switch it on. Press the
ON/OFF Button on the Heating Base. The Indicator light will illuminate,
and the heating will commence.
Wait for the water to Boil and Steam to emerge from the Steam Vent Holes.
After 10 minutes, press the ON/OFF Button, switch off the wall socket,
unplug the power cable, wait for 30 minutes to allow sufficient time for the
appliance to cool.
Invert the Heating Base to pour out excess water. Rinse the Cover and
Poaching Tray under running water. Repeat the process. Thereafter the
appliance is safe to use.
DO NOT Press the ON/OFF Button too forcefully.
Make sure to remove any label or protective sheet which may prevent its
proper functioning.
Switching the appliance ON
Plug the power cable into the wall socket and switch it on. Press the
ON/OFF Button on the Heating Base. The Indicator light will illuminate,
and the heating will commence
.
(henceforth “switching the appliance on” is intended to include the steps
above)
Switching the appliance OFF
Press the ON/OFF Button on the Heating Base, switch off the wall socket
and unplug the power cable.
(henceforth “switching the appliance off” is intended to include the steps
above)
DO NOT: