www.powermaxfitness.net
14
•
Method of judging which part is loose: Remove the four screws on protective cover, make
the treadmill run at a speed of 1 km/h, and then stand on the running belt, grip the
armrests, and tread the treadmill belt slightly. (we advise treading the treadmill belts with
the user's own weight)
A.
The instantaneous step can not stop the belt, the tightness is appropriate.
B.
If your instantaneous step stops the running belt, but the multi-wedge belt and former
roller is still running, it indicates that the running belt is loose and appropriate adjustments
must be made to facilitate the safe use.
C.
If you observe that the instantaneous step makes the treadmill belt and multi-wedge belt
stop, but the motor is still running, it indicates that the multi-wedge belt is loose and
appropriate adjustments must be made to facilitate the safe use
Step 2:
Use a wrench to adjust the screws on the motor base according the condition. Meanwhile,
gently flip the multi-wedge belt between the motor shaft and the front roller, if it is too
loose, you can flip the multi-wedge belt by 100%; if it is too tight, the degree for you to
flip the belt is very limited. It is appropriate to flip the multi-wedge belt by 80% after
adjustment. Please adjust the tightness of the multi-wedge belt into the state that it could
be flipped by 80%.
Step 3:
Finally lock the motor base, and install the front cover.
Applying Silicone Oil
Step 1:
Lift the running belt slightly.
Step 2:
Open the silicone oil bottle, squeeze the silicone oil on the sides of running board, as
shown in the following picture:
