PowerMax TDA-595, Owner'S Manual

Page: 42 / 45

42 www.powermaxfitness.net
15
.
Current sensor W fault
10. How to lubricate the treadmill
Lubricating oil
The treadmill is oiled when leaving the factory, but lubricity of treadmill shall be
inspected frequently, which helps to keep it in optimum state. The treadmill must be
oiled after 1 year or running for 100h. Lift one side of the running belt and touch the
surface of running platform after running for 30h or 30 days. It is unnecessary to
lubricate if there is silicone oil; if the surface is clearly dry, please oil it as instructed
below.
Please use non-petroleum silicone oil
1. As shown in the figure, it needs to oil the running belt after the treadmill is used for
some time. Lift one side of the running belt, place the silicone oil bottle below the
running belt and apply silicone oil to running board. (Apply silicone oil to the middle of
running board)
2. Turn on the treadmill to run for some time after oiling to uniformly apply silicone oil
to running belt.
Note: stop the treadmill to make the running belt still when oiling the running belt.
Lower