www.powermaxfitness.net
14
Note:
please confirm that all screws are locked uniformly according to the requirements after
installation, and check no part is left out before plugging electricity.
4. USING INSTRUCTIONS
Using treadmill
1. Insert the power plug properly and turn on the switch (in red colour) (1). When the light is on,
there will be a beep sound, and then the screen will be light up (Systems of TFT screen takes more
time to enter the start interface).
2. Please keep the safety key away from children when the treadmill is not in use. Please put the
silicon oil bottle in places children cannot reach. If it is eaten or split into eyes by mistake, please
use water to wash and consult doctor immediately.
3. Safety key Introduction
The treadmill can only start when the safety key is put on the yellow area of the console. Clip the
safety key on clothes when using the treadmill to prevent accidents. Put the safety key back when
continue using the treadmill.
SYSTEM INSTRUCTIONS
1. Start
Press this button to start the treadmill when in standby mode.
2. Stop
Press this button to stop the treadmill when in running mode.
3. Program
A.
In standby mode, press this button to cycle by the order of P1→P2...P12→FAT→P0
(standby).
B.
In standby mode, press this button for long time to set the parameter values (please refer
to the parameter setting instructions for details).
1
