www.powermaxfitness.net
12
STORAGE AND MAINTENANCE
1. STORAGE:
For saving the space, you can fold the treadmill. Unscrew the adjustment knob of
the Adjustment tube (32) 2 or 3 circles. Pulling it out and holding, push the Main frame (35) to
the folded position at the same time. Please refer below picture
2. CLEANING:
After used some time, the treadmill maybe become dirty. Remove dust or dirty on
the treadmill with a damp cloth slightly. Periodical cleaning will help to prolong the product life.
Never use solvents on the deck or belt. To use solvents can reduce the life of the deck and belt.
3. BELT CENTERING ADJUSTMENT:
When you run or walk, you may push off harder with one
foot than the other. This will cause the running belt to run off-centered. Occasionally the belt may
need further adjustment to keep it centered. To center the belt, use the enclosed Allen wrench
(#42) to adjust the rear roller position. (refer below picture)
If the belt is too far to the left side:
A: Turn the right roller bolt 1/4 turn clockwise (tighten)
B: Turn the left roller bolt 1/4 turn counter-clockwise (loosen)
If the belt is too far to the right side:
A: Turn the left roller bolt 1/4 turn clockwise (tighten)
B: Turn the right roller bolt 1/4 turn counter-clockwise (loosen)
