80
Starting the Engine
1.
Push the fuel valve to the “ON” position.
2.
Move the Choke Lever to the “CLOSED” position.
Note: if the engine is hot, closing the choke is not necessary.
3.
Move the throttle lever slightly to the left.
4.
Start the engine.
Recoil Start
a.
Turn engine switch to the “ON” position.
b.
Pull the starter grip towards your shoulder, until you feel it catch, then pull briskly.
With Electric Start
a.
Turn the engine switch to the “START” position and hold it
until the engine starts.
b.
Once engine starts, release the engine switch to “On”.
CAUTION
Releasing the handle
suddenly and allowing the
starter grip to hit the engine
may cause damage to the
starter. Return it gently to
prevent damage
.
CAUTION
Do not use the electric starter
for more than 5 seconds or
motor damage may occur. If
the engine fails to start,
release the switch and wait 10
seconds before operating the
starter again.
Summary of Contents for M1175D
