Powerhorse M1175D, Owner'S Manual

Page: 78 / 94

78
Pre-Operation Inspection
1. Engine Oil
SAE-10W-30 is recommended for general, all temperature use. Other viscosities shown in the chart may be used
when the average temperature in your area is within the indicated range.
1.)
Ensure that the engine is stopped and on level ground.
2.) Remove the oil filler cap and wipe the dipstick clean.
3.) Insert the dipstick into the oil filler neck but do not screw it in.
4.) If the level is low, fill to top of the oil filler neck with the recommended oil.
5.) Reinstall the dipstick.
2. Air Cleaner
Dismantle the air cleaner housing and check its filter element, make sure it is clean and intact, otherwise clean or
replace the filter.
CAUTION

Engine oil is a major factor affecting engine performance and service life. Non-detergent
oils and vegetable oils are NOT recommended. Be sure to check the engine oil level on a
level surface with the engine stopped.
CAUTION

Running the engine with insufficient oil can cause serious engine damage.
CAUTION

Never run the engine without the air cleaner. Rapid
engine wear will result from contaminates, such as dust
and dirt, being drawn through the carburetor and into the
engine.