Assembly Instructions
41
Step 16
Connect the Long High-Pressure hose to
high pressure fitting on the pump and the
high pressure fitting on the control valve
inlet.
Connect the Short High-Pressure Hose to
High-Pressure Fittings on the cylinder and
the work port of the valve.
Tighten the fitting connections to 47 lb-ft.
(No hydraulic sealant required)
Log Table
Beam
Assembly
Cotter Pin
Step 17
Install the Log Tables to the Beam
Assembly. A soft-faced mallet may be
required.
Secure the Log Tables with the supplied
Cotter Pins.
Short High-
Pressure Hose
Long High-
Pressure Hose
Control Valve
Inlet
Valve work port
High-Pressure
Fitting
